Road-MobileSeg: Lightweight and Accurate Road Extraction Model from Remote Sensing Images for Mobile Devices.

Current road extraction models from remote sensing images based on deep learning are computationally demanding and memory-intensive because of their high model complexity, making them impractical for mobile devices. This study aimed to develop a lightweight and accurate road extraction model, called Road-MobileSeg, to address the problem of automatically extracting roads from remote sensing images on mobile devices. The Road-MobileFormer was designed as the backbone structure of Road-MobileSeg. In the Road-MobileFormer, the Coordinate Attention Module was incorporated to encode both channel relationships and long-range dependencies with precise position information for the purpose of enhancing the accuracy of road extraction. Additionally, the Micro Token Pyramid Module was introduced to decrease the number of parameters and computations required by the model, rendering it more lightweight. Moreover, three model structures, namely Road-MobileSeg-Tiny, Road-MobileSeg-Small, and Road-MobileSeg-Base, which share a common foundational structure but differ in the quantity of parameters and computations, were developed. These models varied in complexity and were available for use on mobile devices with different memory capacities and computing power. The experimental results demonstrate that the proposed models outperform the compared typical models in terms of accuracy, lightweight structure, and latency and achieve high accuracy and low latency on mobile devices. This indicates that the models that integrate with the Coordinate Attention Module and the Micro Token Pyramid Module surpass the limitations of current research and are suitable for road extraction from remote sensing images on mobile devices.

Estimation of soil copper content based on fractional-order derivative spectroscopy and spectral characteristic band selection.

Hyperspectral remote sensing is a rapid and nondestructive method to estimate the soil copper content. However, before establishing the spectral estimation model, it is crucial to preprocess the hyperspectral data to eliminate noise and highlight the spectral response characteristics of copper. The two commonly used spectral preprocessing approaches, i.e., the first- and second-order derivatives, may not provide sufficient information on the copper in the soil spectra. Therefore, this study investigates the potential of using the fractional-order derivative (FOD) of the spectra (FOD spectra) for estimating the soil copper content. A total of 170 soil samples were collected, and the soil reflectance spectra were measured outdoors using an ASD FieldSpec3 portable spectrometer. The soil copper content was obtained by chemical analysis in the laboratory. A quantitative estimation model of the soil copper content was established by combining the FOD spectra with different orders and using the partial least squares (PLS) method. The results revealed that the accuracy and prediction ability of the models using different orders of the FOD spectra varied significantly. The model using the 0.8-order FOD spectra performed the best, and the coefficient of determination (R2) and the ratio of the performance to deviation (RPD) of the validation set were 0.6416 and 1.63, respectively. The performance of the model using three characteristic bands (2365.5 nm and 2375.5 nm of the 0.9-order derivatives and 864.5 nm of the 1.1-order derivatives) provided significantly better performance than utilizing all wavelength bands from 400 to 2400 nm. This model provided the optimum predictive ability (R2: 0.6552 vs. 0.6416, RPD: 1.65 vs. 1.63) and was straightforward, requiring only three bands. These results show that it is feasible and practical to establish an accurate and rapid estimation model of the soil copper content using FOD spectra.

Monitoring the soil copper pollution degree based on the reflectance spectrum of an arid desert plant.

Visible and near-infrared reflectance spectroscopy offers a rapid, inexpensive, and environmentally friendly method for monitoring copper pollution in the soil. However, the application of this approach in vegetation-covered areas is still a challenge due to interference from plants, making it difficult to acquire soil reflectance spectra. To address this problem, this study assesses whether the reflectance spectrum of a widely distributed arid desert plant (Seriphidium terrae-albae) can be used to rapidly evaluate copper pollution in the soil. A pot experiment was conducted for five months from April to September 2019. The reflectance spectra of the plants were measured in June, July, and August 2019 using an ASD Fieldspec3 spectrometer. Each month, the five vegetation indexes with the highest correlation with the evaluation value of the copper pollution degree were input into an extreme learning machine (ELM) to build a model to monitor the degree of copper pollution in the soil. The results showed that the model could quickly evaluate the degree of copper pollution, but the accuracy varied widely among the calculated vegetation indexes depending on the month when the spectral data were extracted. The model constructed by selecting ten vegetation indexes composed of plant spectra collected in June and July provides high recognition accuracy, reaching 89.02%. Only seven bands were needed due to the model's low complexity, which means that it has great potential to be applied to remote sensing images to establish a real-time monitoring system to detect copper pollution in the soil. This study proposed a simple and rapid method for monitoring copper pollution in soil using plant spectra, and this method could provide extremely valuable for soil protection and management in arid desert areas.

Exploring the Potential of HySpex Hyperspectral Imagery for Extraction of Copper Content.

Detritus geochemical information has been proven through research to be an effective prospecting method in mineral exploration. However, the traditional detritus metal content monitoring methods based on field sampling and laboratory chemical analysis are time-consuming and may not meet the requirements of large-scale metal content monitoring. In this study, we obtained 95 detritus samples and seven HySpex hyperspectral imagery scenes with a spatial resolution of 1 m from Karatag Gobi area, Xinjiang, China, and used partial least squares and wavebands selection methods to explore the usefulness of super-low-altitude HySpex hyperspectral images in estimating detritus feasibility and effectiveness of Cu element content. The results show that: (1) among all the inversion models of transformed spectra, power-logarithm transformation spectrum was the optimal prediction model (coefficient of determination(R2) = 0.586, mean absolute error(MAE) = 21.405); (2) compared to the genetic algorithm (GA) and continuous projection algorithm (SPA), the competitive weighted resampling algorithm (CARS) was the optimal feature band-screening method. The R2 of the inversion model was constructed based on the characteristic bands selected by CARS reaching 0.734, which was higher than that of GA (0.519) and SPA (0.691), and the MAE (19.926) was the lowest. Only 20 bands were used in the model construction, which is lower than that of GA (105) and SPA (42); (3) The power-logarithm transforms, and CARS combined with the model of HySpex hyperspectral images and the Cu content distribution in the study area were obtained, consistent with the actual survey results on the ground. Our results prove that the method incorporating the HySpex hyperspectral data to invert copper content in detritus is feasible and effective, and provides data and a reference method for obtaining geochemical element distribution in a large area and for reducing key areas of geological exploration in the future.

[Establishment and application of eco-environmental risk assessment system of highway: a case study from G315 Yitunbulake-Qiemo section of Xinjiang].

The eco-environmental risk assessment system of highway, based on the Analytic Hierarchy Process and specialists' ideas, is set up. To give prominence to the spatial attribute of each assessment index the weight values were determined by the magnitude of special range that was influenced by assessment index. By translating relative maps using GIS the influenced range of environmental factors, the area occupied, was gotten. The lengths impacted by disaster factors were measured by the route reconnaissance and design. The results of applying the assessment system to evaluate the eco-environmental risk assessment of G315 Yitunbulake-Qiemo section of Xinjiang show that the eco-environmental risk indices of the road region, eco-environmental risk assessment (ERA) were between 1.55-3.23. According to the heterogeneity of the ecoenvironmental vulnerability indices (sigma x(i)w(i)) and disasters indices (sigma y(i)w(j)) included in ERA, 4 risk ranks to assess the eight units of landscape ecology in the Yitunbulake-Qiemo section of G315 highway were carried out, which factually reflects the characteristics of the eco-environmental risk for the highway.